TRIVORA / AUTOMOTIVE COMPONENTS

Actuators

An actuator converts pneumatic or electrical input into movement of the turbocharger control mechanism. The drive type and connection depend on the application.

View products ↗
Actuators · family concept
Family concept · Not a specific product photograph

Focus on turbocharger actuation and the mechanism it controls.

Component and operating-path illustration; open full size
Simplified functional illustration · Not a specific model or service drawingView full size ↗

Working principle

An actuator moves a wastegate or variable-geometry mechanism. The energy and command path depend on the design: pressure, vacuum or electrical control.

Know the difference.

Pressure-operated

Pressure acts on a diaphragm mechanism to move the linkage.

Vacuum-operated

Vacuum operates a pneumatic mechanism.

Electronic

An electrically controlled drive positions the mechanism; implementation depends on the unit.

Before you choose.

  • Identify the mechanism: wastegate or variable geometry.
  • Confirm travel, linkage, connector and control requirements.
  • Follow the specified calibration procedure for the exact assembly.
Does a matching connector mean compatibility?

No. Mechanical travel, control characteristics and calibration also matter.

Technical sources

Independent general introduction. Types shown are not a statement of TRIVORA stock, specifications or manufacturer affiliation. Selection notes are editorial guidance. Reviewed 6 November 2026.

聚焦涡轮增压执行器,以及它所驱动的机械机构。

部件与工作路径示意,点击查看大图
简化功能示意 · 非具体型号结构或维修图查看大图 ↗

工作原理

执行器驱动旁通阀或可变几何机构。不同设计采用压力、真空或电气控制,将控制需求转换为机械动作。

产品类型

压力驱动式

压力作用于膜片机构,带动连杆。

真空驱动式

真空作用于气动机构,实现动作。

电动式

通过电气驱动控制机构位置,具体实现依总成而定。

选型要点

  • 先识别控制对象:旁通阀或可变几何机构。
  • 核对行程、连杆、插头和控制要求。
  • 按对应总成的规定进行标定或匹配。
插头一样就能替换吗?

不能。还需匹配机械行程、控制特性和标定要求。

技术资料来源

通用原理的独立整理,不表示 TRIVORA 库存、具体产品规格或厂商授权关系。选型要点为编辑提示。资料核对日期:2026-11-06。