TRIVORA / AUTOMOTIVE COMPONENTS

电磁阀

电信号驱动阀件,对气动控制通路进行切换或调节。接口排列和控制特性取决于具体阀型。

查看系列产品 ↗
电磁阀 · 系列概念图
系列概念展示 · 非具体型号实拍

This guide covers electropneumatic valves used with intake and exhaust controls.

Component and operating-path illustration; open full size
Simplified functional illustration · Not a specific model or service drawingView full size ↗

Working principle

Electrical control changes a pneumatic path. A connected actuator then uses pressure or vacuum to operate a mechanism. Switching valves route the supply; pressure converters regulate it.

Know the difference.

Switchover valve

Selects between pneumatic connections for switching functions.

Pressure converter

Adjusts the pneumatic output for controlled actuation.

Before you choose.

  • Confirm each port function and connection layout.
  • Identify voltage and the required electrical control method.
  • Distinguish a control valve from a pressure sensor.
Does PWM identify a separate valve type?

PWM describes a control method. A switching valve may also use PWM; the signal name alone does not establish its pneumatic function.

Technical sources

Independent general introduction. Types shown are not a statement of TRIVORA stock, specifications or manufacturer affiliation. Selection notes are editorial guidance. Reviewed 6 November 2026.

用于进排气系统的电气气动控制。

部件与工作路径示意,点击查看大图
简化功能示意 · 非具体型号结构或维修图查看大图 ↗

工作原理

电气控制改变气路,连接的执行器利用压力或真空驱动机构。切换阀改变通路,压力转换器则调节压力或真空。

产品类型

切换阀

在气路接口之间切换,实现通断或路径选择。

压力转换器

调节气动输出,控制执行器动作。

选型要点

  • 确认每个管口功能及连接布局。
  • 确认工作电压与所需电气控制方式。
  • 区分用于控制的阀与用于测量的压力传感器。
PWM 是一种独立阀类型吗?

PWM 描述控制方式。切换阀也可能使用 PWM,不能仅凭信号名称判断气路功能。

技术资料来源

通用原理的独立整理,不表示 TRIVORA 库存、具体产品规格或厂商授权关系。选型要点为编辑提示。资料核对日期:2026-11-06。